7 - ENG LISH
ADJUSTING THE NAILING DEPTH
WARNING
Disconnect the tool from the air source before making
adjustments.
Such precautionary safety measures reduce
the risk or unintentional tool operation.
1. Disconnect tool from air supply.
2. Remove nails from the tool.
3. Adjust tool driving depth:
• To reduce the nail depth , turn the adjustment knob
counter clockwise (FIG 8).
• To drive the nail deeper, turn the adjustment knob
clockwise (FIG 9).
4. Reload nails as described in the "Loading Nails" section
of this manual.
5. Reconnect air supply.
Depth of Drive
Adjustment
FIG. 8
Too Deep
Flush
Turn the adjustment knob counter clockwise
Too Shallow
Turn the adjustment knob clockwise
Depth of Drive
Adjustment
FIG. 9
Flush
ADJUSTING THE EXHAUST
The direction of the exhaust vent can be changed by turning
the top cover (FIG 10).
FIG. 10
USING THE NO-MAR TIP
WARNING
When attaching or detaching the No-Mar Tip, be sure to
remove your finger from the trigger and disconnect the air
hose from the nailer.
If you like to protect the surface of workpiece against
scratches or markings made by the safety, attach the
accessory No-Mar Tip to the safety.
To replace the No-Mar Tip:
1. Disconnect air hose from tool.
2. Put the No-Mar Tip to the toe of the safety.
To remove the No-Mar Tip: Pull the no mar tip directly away
from tool.
NOTE:
The nose cap may reduce nailing depth due to its
thickness. Re-adjustment of nailing depth is required.
FIG. 11
No-Mar Tip
Safety
MAINTENANCE
JAM CLEARING
If a nail becomes jammed in the tool, disconnect the air
hose and keep the tool pointed away from you while clearing
the jam.
1. Disconnect the tool from the air supply.
2. Remove nails from the tool.
3. Insert screwdriver into the driving mechanism.
4. Tap the screwdriver gently with a hammer. The inserted
screwdriver should push the driver blade back, freeing
the nail jam
5. Remove the bent nail, using needle-nose pliers if
necessary.
6. Reconnect the tool to the air supply.
7. Reload the tool with nails.
Summary of Contents for VX CHFN35P
