Network Communication (for Tap to Charge)
Figure 26: Gateway recommended location and setup
4.
Setup the Gateway
o
Once the gateway location is set, mount the holder to the wall
o
Place the gateway in the holder
o
Plug the GW to the power outlet and to the internet port – GW power
LED (most left light) indicator will be green
o
GW will start initiation. After few minutes, network LED (most right light)
will be
solid green
o
If the network LED does not become solid green after five minutes, check
that network cable is connected and internet port is active. Then unplug it
from power and plug back.
o
In case the above is not helping, contact Powermat support center.
Figure 27: Gateway indicators