Wiring
a.
'Inline' Daisy Chain Setup:
Below is an example of a table that uses an 'Inline' daisy chain wiring harness to
connect its Charging Spots.
Figure 15: Inline wiring harness example
b.
'Inline' Daisy Chain with Pigtails Chopped:
Below is an additional example of a table that uses an 'Inline' daisy chain wiring
harness to connect its Charging Spots. This example, though, shows a table that
has only two Charging Spots. In this case the wiring harness is shortened by
cutting its pigtails.
Note: Wiring harness pigtails are shortened (cut) if there are less Charging
Spots than wiring harness connectors on a daisy chain, or if the distance
between the Charging Spots is greater than the given distance on the daisy
chain. In addition, you can connect 2 daisy chains using the open crimps at the
end of the cable. This is done when more than 5 Charging Spots need to be
connected.
Figure 16: Inline wiring harness example #2