Power Delivery Guidelines
Figure 20: Powerbox back plate
c.
Break the proper knockouts and attach the wire channel to the back plate
through the gap
d.
Insert the Powerbox to the back plate; make sure the red/white DC wires are
facing the correct direction (to the wire channel).
i.
For “bladed” version – make sure the blades are fully inserted to the
upper socket
ii.
For “hard wired” version, properly connect the AC wires to the junction
box
Figure 21: “Hard Wired” Powerbox
iii.
Crimp the Powerbox DC wires to the main wire running to the table inside
the wire channel
NOTE –
Please use a certified electrician when installing a hard wired Powerbox
Do not connect the Charging Spots before Powerbox is fully installed
and Powered.