Wiring
2.
Charging Spot Wiring
1.
Determine wiring path, and identify the jacks you would like to use for your
input.
2.
Using a narrow flat head screwdriver, push the respective terminal button, and
insert the positive wire (red or sometimes white) into the red DC push wire jack
terminal, and the negative wire (black) into the grey DC push jack terminal.
NOTE - Make sure to connect wire polarities correctly. Reversing polarities
will cause permanent damage to the Charging Spot.
Figure 11: Charging Spot electrical module, wiring locations
3.
Take out the sticker attached to the Charging Spot and place it on the Charging
Spot housing (H).
4.
Cut the proper knockouts in the Charging Spot housing (H) using cutting pliers,
5.
Secure the Charging Spot housing to the surface using 4 x #6 1” screws (B)
Figure 12