Wiring
6.
Place screw plugs (C) over mounting screw holes, and press until flush.
Figure 13
7.
Connect wires to the Powermat-approved power supply. As previously, make
sure to match polarities according to the respective wire color-coding or to the
daisy chain
3.
Using Powermat Daisy-Chain Wiring Harnesses
Powermat uses specially designed wiring harnesses to provide the necessary power to
the table mounted Charging Spots. These wiring harnesses are daisy chained within
the table in one of the following two different configurations.
‘Inline’ Wiring Harness
‘T6’ Wiring Harness
These wiring harnesses can be configured to supply power to up to 8 CSs from one
power supply.
1.
Inline or one way wiring harness:
Figure 14: Inline wiring harness