background image

®

*,--W®/,-W®/*-®E®1 -

 

BEGINNER’S GUIDELINES

• 

Work out at least two times a week.

• 

Include six to eight exercises that train major muscle groups.

• 

Perform two or three sets of at least eight to 12 repetitions.

AEROBIC

Exercise that primarily uses oxygen to burn fuel at low to moder-

ate levels of intensity. Running and jogging are examples of 

aerobic exercise.

ANAEROBIC

Exercise that primarily uses the body’s stored fuel for 

energy. Intense weight lifting is an example of an anaerobic exer-

cise.

ATROPHY

Decrease of a muscle caused by the decrease in the size of its 

cells because of inactivity.

BALLISTIC STRETCHING

A stretching technique that involves a bouncing or bobbing move-

ment during the stretch. The final position is not held. This is not a 

recommended stretching technique.

BREATHING

Never hold your breath during any part of an exercise. Holding 

your breath may cause severe intra-thoracic 

pressure and raise blood pressure leading to dizziness, blackout 

or other    complications. The rule of thumb is to exhale on exer-

tion and inhale on the return part of the exercise.

CARDIOVASCULAR

Referring to the heart, lungs, and other periphery systems involved 

in the transport of oxygen throughout the body.

CHALLENGE YOUR MUSCLES

All strength training should progress gradually, using increases in 

weight until your goals are reached. Then, change your workout 

to include increased reps or a higher weight resistance. Alter the 

order of your exercises, 

perform multiple sets or different exercises to maintain results or 

reach new goals.

CHANGE ROUTINE

Beginner’s please note: If you want to make changes in the 

exercise routine that you do, wait until about the six to eight week 

point. Advanced lifters may want to change routines to avoid 

plateaus in gaining size or strength.

CIRCUIT TRAINING

Exercise stations that consist of various combinations of weight 

training, flexibility, calisthenics, and aerobic 

exercise.

CONCENTRIC MUSCLE ACTION

The muscle shortens while contracting against resistance.

ECCENTRIC MUSCLE ACTION

The muscle lengthens while contracting against resistance.

EXERCISE FREQUENCY

Exercise each muscle group 2-3 times per week. Allow a minimum 

of 48 hours rest for each muscle group worked. If you are doing a 

total-body workout, three training sessions per week, performed 

on every second day, is adequate.

EXERCISE LARGE MUSCLES FIRST

You should work your large muscle groups first (ie. squat, bench press, lat 

pulldown) before you exercise your small muscle groups (ie. biceps curls, 

tricep pressdowns, lateral raises). 

EXERCISE PROGRAM DURATION

A weight training routine should take anywhere from 45 minutes to one hour 

to complete. Add another 20 to 60 minutes when you include stretching, 

warm-up, aerobics and cool-down.

GIVE YOUR MUSCLES A REST

You’ll get the most out of strength training if you give your muscles at least 

48 hours rest to recover and rebuild between strength training workouts.

HYPERTROPHY

Enlargement of a muscle caused by an increase in the size of its cells in 

response to weight training.

INTENSITY

The degree to which the body is worked during exercise.

ISOKINETIC EXERCISE

Resistance is given at a fixed velocity of movement with 

accommodating intensity. A machine that moves you through an entire 

range of motion at a preset speed and will not change no matter how much 

pressure is put forth by the individual.

ISOMETRIC EXERCISE

Contracts the muscle statically without changing its length. 

Example: Attempting to lift a weight heavier than you can handle, but can-

not move.

ISOTONIC EXERCISE

Shortens and lengthens the muscle through a complete range of motion. 

This defines weight training with full range of motion.

MUSCLE FATIGUE

Fatigue is when you can’t possibly do another rep without 

sacrificing form. 

MUSCULAR ENDURANCE

The ability to perform repetitive muscular contractions against some resis-

tance. 

MUSCULAR STRENGTH

The maximum force that can be applied by a muscle during a single maxi-

mum contraction. 

OSTEOPOROSIS

A decrease in bone density.

PLYOMETRIC EXERCISE

A technique that includes specific exercises which encompass a rapid 

stretch of a muscle eccentrically, followed immediately by a rapid concen-

tric contraction of that muscle for the purpose of facilitating and developing 

a forceful explosive movement over a short period of time. Examples of 

these are using medicine balls for upper extremity and depth jumping for 

lower extremity.

32

           

pHraSeS, terMS, tipS & GuidelineS

 22

© Best Company srl

Summary of Contents for BSG10X

























































Reviews: