Powerline BSG10X, Owner'S Manual

Page: 16 / 56

16
6
S t e p
Be careful to assemble all components
in the sequence they are presented.
A. Install one Foam Roller (25) onto Foam Roller Bar (1) using a Plastic Washer
(26) and Plastic End Cap (27) as shown.
Do this three times: onto one side of each of the three Foam Roller Bars (1).
B. Slide (partially assembled) Foam Rollers Bar (1) into holes in Main Frame
(A) under Back Pad (Q), in front of Seat Pad (Q) and into the lower hole in
the leg extension.
C. Install all remaining Plastic Washers (26), Foam Rollers (25) and Plastic End
Caps (27) as shown.
D. Install accessory handles to cable ends using Snap Links (18). Install the Lat
Bar (6) at the high cable position, Ab Crunch Harness (13) at the mid row
cable position and the Low Row Bar (9) with Chain Extension (17) at the low
cable position.
Chain Extension (17) may be used at any position to provide extra cable
length.
© Best Company srl