47
Assembly Instructions
Cradles to Beam
M8-1.25 x 30mm Bolt
Qty: 4
Cradles to Beam
M8-1.25 Nut
Qty: 4
Step 11 – Log Cradle Assembly
Remove vertical pin and lynch pin. Pivot beam to the horizontal
position and re-install both pins into tow bar.
Install (2) bolts and (2) nut into the bottom holes of the beam.
Using the slots in the bottom of each log cradle arm, rest the log cradle
arms on the installed bolts and nuts.
Install the remaining (2) bolts and (2) nuts into the top holes of the
beam and log cradle arms.
Torque to 21 ft.-lb.
Tools Needed
13mm Wrench
Torque Wrench
Fasteners Needed from Parts Bag:
Nuts
Beam
Log Cradle
Bolts
