50
Assembly Instructions
Step 15 - Fittings
Remove plugs from ports in control valve
Lubricate O-ring and threads on fitting with clean oil
Looking at fitting from end with nut/washer/O-ring assembly, turn nut
clockwise as far as possible
Using wrench, turn (1) Valve to Cylinder Hose Fitting into valve port
marked “B” until washer touches control valve. Continue turning until
washer touches thread nearest wrench pad
Back off fitting counterclockwise not exceeding one revolution until it
is oriented in the correct position
Place wrench on the wrench pad of fitting to prevent fitting from
turning and torque nut to 37-46 ft.-lb.
Thread Valve to Cylinder Hose Fitting Nut on to Valve to Cylinder
Hose.
Place wrench on hose end fitting to prevent from turning and torque
Valve to Cylinder Hose Fitting Nut to 27-34 ft.-lb.
Tools Needed
7/8” Wrench
3/4” Wrench
1” Wrench
OR
Crescent Wrench
(2 needed)
Torque Wrench
Fittings Needed from Parts Bag:
Valve to
Cylinder
Fitting
Valve to
Cylinder Hose
Valve Port
Nut
O-ring
Washer
Part # 778827
Valve to Cylinder Hose Fitting
Qty: 1
