Powerfix PLS 10 A1
English - 13
Environmental regulations and disposal information
Devices marked with this symbol are subject to the European Directive
2012/19/EU. All electrical and electronic devices must be disposed of
separately from household waste at official disposal centres.
Avoid damage to the environment and risks to your personal health by
disposing of the device properly. For further information about proper
disposal, contact your local government, disposal bodies or the shop
where you bought the device.
Dispose of all packaging in an environmentally-friendly manner.
Cardboard packaging can be taken to paper recycling centres or public collection points for
recycling. Any film or plastic contained in the packaging should be taken to your public
collection points for disposal.
Removing the battery
This battery LED emitter (A) contains a built-in battery pack. It must be removed before
disposing of the battery LED emitter (A).
To remove it, proceed as follows:
1. Loosen the 4 Philips screws (arrows) on
the black cover on the battery LED emitter
(A) back panel.
2. Tilt the black cover over.
3. Disconnect the plug of the battery cable
(arrow) and remove the battery.
