8633695
High Speed Air Body Saw
V 4.0
11. Always use blades that are designed to be used with this saw. Blades that
do not match the mounting hardware of the saw may be launched with
great force from the saw causing damage to property or personal injury.
A blade that does not match the mounting hardware may also run
eccentrically, causing loss of control.
12. After changing a blade or making adjustments, make sure that the blade
chuck is holding the blade securely.
13. Do not use dull or damaged blades.
14. Do not use the tool on any material containing asbestos.
15. Avoid cutting nails. Inspect the work piece for any nails and remove
before cutting.
16. Do not touch the blade or the surface that has been cut with this tool
immediately after use. The surface will be hot and may cause an injury.
AIR TOOL PRECAUTIONS
1. Extended exposure to air tool noise may cause hearing loss. Ear protection
gear can reduce or eliminate the noise level.
2. Inspect the tool's air line for cracks, fraying or other faults before each use.
Discontinue use if the air line is damaged or hissing is heard from the air
line or connectors, while operating the tool. Replace the defective
component/air line.
3. Do not allow people, mobile equipment or vehicles to pass over the
unprotected air line. Position the air line away from high traffic areas, in a
reinforced conduit or place planks on both sides of the airline to create a
protective trench.
4. Prevent damage to the air line by observing the following:
a. Never carry the tool by the air line.
b. Keep the air line behind the tool and out of the tool's work path.
c. Keep the air line away from heat, oil, sharp edges or moving parts.
d. Do not wrap the air line around the tool as sharp edges may pierce or
crack the airline. Coil the air line when storing.
6
For technical questions call 1-800-665-8685
