8633695
High Speed Air Body Saw
V 4.0
6. All air tools are packed in grease to prevent corrosion of internal parts
during shipping and storage. We recommend that you clean this out to
have optimum performance from your new air tool. Use two drops of air
tool oil to lubricate the tool and run the tool under no load until exhaust
is clear.
7. In the event that it becomes necessary to store the tool for an
extended period of time (overnight, weekend, etc.), it should receive
a generous amount of lubrication at that time. The tool should be run
for approximately 30 seconds to ensure oil has been evenly
distributed throughout the tool. The tool should be stored in a clean
and dry environment.
NOTICE! NEVER use a penetrating oil to lubricate the tool. Penetrating oil
may act as a solvent that can break down the grease and cause the tool to
seize up.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
14
For technical questions call 1-800-665-8685
