8708703
16-Speed Floor Mount Drill Press
V4.0
6
For technical questions call 1-800-665-8685
10. Only use accessories that are specifically designed for use with the tool.
Ensure the accessory is tightly installed.
CUTTING TOOL PRECAUTIONS
WARNING! Some surfaces contain materials which can be toxic. When
working on materials that may contain lead, asbestos, copper chromium
arsenate or other toxic materials, extra care should be taken to avoid
inhalation and minimize skin contact.
The term cutting accessory is used to represent a cutting blade, cutting wheel
or a cutting bit.
1. Keep hands away from the cutting area and the cutting accessory.
2. Only use a cutting accessory of the recommended size (see
Specifications).
3. Use the correct mounting hardware. The mounting hardware is designed to
hold the cutting accessory on the tool to allow optimum performance and
safety of operation. Mismatched mounting hardware may result in a tool
malfunction and cause an injury.
4. Only use a cutting accessory that exceeds the No Load Speed rating (see
Specifications).
5. Check the cutting accessory for damage before each use. A damaged
accessory can break during use and cause serious injury.
6. Inspect material for foreign objects such as staples, nails or debris.
Remove from material before cutting.
7. Affix the workpiece to a stable platform to prevent movement, minimize
body exposure to injury, cutting accessory binding or loss of control.
8. Do not touch the cutting accessory or the workpiece surface cut with this
tool. They may be hot and could inflict a burn injury.
DRILLING PRECAUTIONS
NOTICE! Immediately switch the power off if the drill bit becomes
stuck or jammed. The tool’s torque may damage the drill mechanism
and/or workpiece.
The term bit refers to any drill bits, router bits or tool accessories that penetrate
a material and creates a cavity through a rotary motion.
