8708703
16-Speed Floor Mount Drill Press
V4.0
18
For technical questions call 1-800-665-8685
LUBRICATION
Inspect and lubricate the tool when required. Only use light oil to lubricate the
tool. Other lubricants may not be suitable and could damage the tool or cause a
malfunction during use.
1. All bearings are packed with grease at the factory and require no
further lubrication.
2. Occasionally, lubricate the quill shaft assembly and rack with light oil
if required.
3. Apply a thin coat of wax paste or light oil to the table and column, for
lubrication and to help prevent corrosion.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
1. Components should be kept dry, with machined surfaces lightly oiled.
2. Always remove drill bits and store in a safe place.
3. Never store equipment in a wet/damp environment.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
