5
©
All rights reserved. All trademarks are property of their respective owners.
4.3 Front panel view
Front Panel
LED Type
Digital Type
“ON/OFF/TEST/SILENCE” button
No matter the UPS plugged in or not. Press the “ON/OFF/TEST/SILENCE” button till the
beep stop to turn on or to turn off the UPS. When UPS is working under AC mode, it also
activates the UPS‘s self-test by pressing the bottom less than 1 second.
In back up mode, press and hold the bottom about 1 second to activate the UPS’s silence
function.
“L IN E m od e” in d icato r (Gree n )
Th e in d i cato r i llu m in ates wh en t h e u t i li ty in p u t is n or m al.
“AVR BOOST mode” indicator (Yellow)
Th e i n d i cato r i llu m in ates wh en th e UP S b oo st th e in p u t p o wer to
as s oc iate th e l oad .
“BACKUP mode” indicator (Yellow)
The indicator illuminates when the power is supplied from the battery.
“AVR BUCK mode” indicator (Yellow)
The indicator illuminates when the UPS buck the input power to associate the load.
“Battery Fault indicator (Red)
The indicator illuminates to indicate two statuses of the UPS: When this Red LED is
steady illuminated, it indicates that the battery needs to be replaced or the charger of
UPS is fail to function. When this Red LED flashes rapidly, it indicates the UPS is over
loaded.
“OVER LOAD” indicator (Red)
The indicator illuminates when the connected loads exceed the maximum rated capacity.
“Battery level” bar
It indicates the battery capacity and battery status. When the battery capacity is low, it
becomes dim, when the battery needs to be replaced or the charger of UPS is fail to
function, indicators on all the bar flash.
“Output Voltage”
This digital indicates present output voltage.
