4. Make sure engine ON/OFF switch is OFF. Slowly pull engine starter cord several
times until antifreeze comes out of pressure hose connection of pressure pump.
DO NOT
start engine at this time.
5. Remove hose from water inlet of pressure pump.
WATERBLASTER
1. Cover Waterblaster with a suitable cover that does not retain moisture such as a
plastic or plastic coated tarp.
2. Store Waterblaster in a clean, dry area.
Certain storage covers can be flammable or can
melt in higher temperatures.
Do not place storage cover over
Waterblaster unit until it has completely cooled.
PREPARING FOR USE AFTER STORAGE
1. Make sure the engine on/off switch is OFF.
2. Slowly pull the Starter cord a few times to clean oil from the cylinder or to eject
any antifreeze from the pump which were added prior to storage.
3. Remove the spark plug from the cylinder. Wipe oil from the spark plug and
return it to the cylinder and retighten.
4. Reconnect the spark plug wire. Then start the engine.
29
Summary of Contents for EGS0252
Page 40: ...38 ...
