meters away from cleaning surface.
• If you get spray nozzle too close, especially using high pressure mode, you may
damage surface being cleaned.
•
DO NOT
get closer than 0.15 meters when cleaning tires.
PRESSURE ADJUSTMENT
Increase distance:
To vary the pressure on the surface being cleaned, vary the
distance between spray wand and the surface being cleaned.
Change pressure wand nozzle:
Completely shut down Waterblaster and stop petrol
engine.Squeeze trigger to release any water pressure in the system. Change spray
nozzle for desired pressure (see "SELECTING THE RIGHT NOZZLE"). Restart engine.
Adjust pump pressure regulator:
The pump pressure regulator
allows pressure adjustment at the pump. Turn pressure regulator
knob on pressure pump counterclockwise/clockwise to
decrease/increase pressure.
USING CHEMICALS AND CLEANING SOLVENTS
Use only soaps and chemicals designed for use with waterblasters.
DO NOT
USE CHLORINE BLEACH.
Chemicals, soaps and cleaning solvents will not siphon when a high pressure
nozzle is used. Use the Chemical Nozzle (Black).
TO APPLY DETERGENT:
1. Prepare detergent solution as recommended by the manufacturer.
2. Remove the detergent tank lid located in front of the Waterblaster.
3. Fill tank with prepared detergent solution. A small funnel may help with this
task. Replace the detergent tank lid.
4. Release the pressure built up in the hose first then lock the trigger and attach
the Detergent Nozzle (Black) to the Wand.
5. Unlock the trigger and squeeze spray gun trigger and apply detergent to a dry
surface, starting at lower portion of area to be washed and work upward, using
long, even, overlapping strokes.
Wetting the surface first is not recommended, as it dilutes
the detergent and reduces its cleaning ability.
23
KNOB
Summary of Contents for EGS0252
Page 40: ...38 ...
