Powerbuilt EGS0252, Instruction Manual

Page: 12 / 40

MAKING ADJUSTMENTS OR REPAIRS TO THE ENGINE
Excessively high operating speeds increase risk of injury and damage to
engine. Excessively low speeds produce heavy load on engine.
• DO NOT attempt to alter pre-set governed speed. Engine governor is factory
set to supply optimum output horse power (HP) when running at governed speed.
• DO NOT modify engine in any way.
TESTING SPARK PLUG FOR SPARK
• DO NOT check spark plug for spark by removing from cylinder head.
• Disconnect spark plug wire from spark plug and cover tip with
non-conducting material such as electrical tape to prevent it from coming in
contact with spark plug, petrol tank or other parts of the engine where damage
can result from sparking.
• Replace a defective spark plug only with authorized parts.
• Use approved spark plug tester.
TRANSPORTING OR REPAIRING EQUIPMENT
RISK OF PROPERTY DAMAGE WHEN TRANSPORTING WATERBLASTER
Turn off the Waterblaster before transport. Use caution when moving the
Waterblaster. Oil/petrol can leak or spill and could result in fire or breathing hazard,
serious injury or death. Oil/petrol leaks will damage carpet, paint, or other surfaces
in vehicles or trailers. Be sure to use the handle to lift or carry the Waterblaster.
• The wheel kit is not designed for over-the-road use. Waterblaster
must be transported in a vehicle or on a trailer.
• Unit is heavy. Take care when lifting or moving unit.
• Transport or repair with petrol tank EMPTY to prevent an unintentional spark
igniting petrol vapors resulting in a fire or an explosion.
• Transport or repair with spark plug wire DISCONNECTED .
10