sketch B
lo
ck engaged
l
ock open
Attach brushes
prior to attach / detach brushes, make
sure, key switch if OFF.
Attach the brush lock
Attach the brush lock which is in the
enclosed bag as shown in sketch A (1)
at the brushes.
●
swing up lower side fairings on both
sides
●
refer to picture and slide brush
under brush head. Lift brush, turn
until in gear, pull up until all 6 pawls
positively catch the drive plate (to
make sure, turn brush by one
revolution)
●
engage lock on brush (refer to
schematic drawing).
Attach thrust plate
with pad
●
invert thrust plate, press pad on
adhesive side, secure with center-
lock.
●
engage thrust plate with pad in drive
plate as described for "attach brus-
hes", positively catch.
Deflector strips on brush head
deflector strips located on both sides
of the brush head may be lifted as
needed, e.g. for basic cleaning without
immediate extraction (soaking).
●
hook-up cable (1) when brush head
is lifted, as shown.
Note:
for all cleaning jobs with imme-
diate extraction, this cable has to be
off hook so that the deflector strip is
seated on the floor.
1
1
sketch A
sketch B
lo
ck engaged
l
ock open
Attach brushes
prior to attach / detach brushes, make
sure, key switch if OFF.
Attach the brush lock
Attach the brush lock which is in the
enclosed bag as shown in sketch A (1)
at the brushes.
●
swing up lower side fairings on both
sides
●
refer to picture and slide brush
under brush head. Lift brush, turn
until in gear, pull up until all 6 pawls
positively catch the drive plate (to
make sure, turn brush by one
revolution)
●
engage lock on brush (refer to
schematic drawing).
Attach thrust plate
with pad
●
invert thrust plate, press pad on
adhesive side, secure with center-
lock.
●
engage thrust plate with pad in drive
plate as described for "attach brus-
hes", positively catch.
Deflector strips on brush head
deflector strips located on both sides
of the brush head may be lifted as
needed, e.g. for basic cleaning without
immediate extraction (soaking).
●
hook-up cable (1) when brush head
is lifted, as shown.
Note:
for all cleaning jobs with imme-
diate extraction, this cable has to be
off hook so that the deflector strip is
seated on the floor.
72
1
1
sketch A
24
