b)
M
anual tank filling
●
swing tank lid open and secure in
place
●
fill s
olution
tank (on the right, in direc-
tion of travel) with water (122
°
F /
50
°
C max.) and add detergent IAW
manufacturer's specifications.
Fill level: upper edge of flex partition
(arrow)
Max. capacity: 82 US gal (310 litres)
●
close tank lid
Note:
use low-foaming detergents
for automatic machines only. We
recommend to use our cleaning
agents, formulated for the
PowerBoss
.
These products comply
with the provisions of the Detergents
Act (WRMG).
Use only recomended
amounts
. Correct dosage saves
money and protects the environ-
ment. Heavy foaming will affect ma-
chine function. It is a sign for over-
dosage or improper matching with
the actual degree of soilage. Non-
consumed detergent in the dirty wa-
ter will cause this foaming.
1 ball cock
2 water pump
3 filter
More details about dosage are printed
on the detergent pack. Use these
figures for a first try. You soon will find
the right detergent for you needs and
its right dosage.
●
Solution Flow
to the brushes
:
s
olution
f
low
automatically starts w
ith
the scrubbing program. If
needed,
solution
flow may be stopped
by closing the ball cock
(1) by hand.
The s
olution
line holds a strainer
(3) that has to be cleaned when dirt
is visible in the bowl.
For this purpose close the ball cock
(1) to avoid leakage
– unthread bowl by hand, remove
filter screen by pulling it down;
– clean both parts with water and
reinstall.
Range on one tank fill
(flex-partition model)
at approx. 0.5 US gal (2 litres)
per minute = 155 minutes
at approx. 1 US gal (4 litres)
per minute = 77 minutes
at approx. 1.85 US gal (7 litres)
per minute = 44 minutes.
Sweeping, wet scrubbing,
vacuum drying
●
drive
Admiral 4
0
as described
on page
18
●
select a cleaning program on control
panel A.
Some examples overleaf.
20
2
3
1
b) manual tank filling
●
swing tank lid open and secure in
place
●
fill suds tank (on the right, in direc-
tion of travel) with water (122
°
F /
50
°
C max.) and add detergent IAW
manufacturer's specifications.
Fill level: upper edge of flex partition
(arrow)
Max. capacity: 82 US gal (310 litres)
●
close tank lid
Note:
use low-foaming detergents
for automatic machines only. We
recommend to use our cleaning
agents, formulated for the Hako-
matic 1100. These products comply
with the provisions of the Detergents
Act (WRMG). Strictly hold to dosing
instructions. Correct dosage saves
money and protects the environ-
ment. Heavy foaming will affect ma-
chine function. It is a sign for over-
dosage or improper matching with
the actual degree of soilage. Non-
consumed detergent in the dirty wa-
ter will cause this foaming.
1 ball cock
2 water pump
3 filter
More details about dosage are printed
on the detergent pack. Use these
figures for a first try. You soon will find
the right detergent for you needs and
its right dosage.
●
suds feed to the brushes
suds feed automatically starts when
starting the scrubbing program. If
needed, suds flow may be stopped
by closing the ball cock (1) by hand.
The suds feed line holds a strainer
(3) that has to be cleaned when dirt
is visible in the bowl.
For this purpose close the ball cock
(1) to avoid leakage
– unthread bowl by hand, remove
filter screen by pulling it down;
– clean both parts with water and
re-install.
Range on one tank fill
(flex-partition model)
at approx. 0.5 US gal (2 litres)
per minute = 155 minutes
at approx. 1 US gal (4 litres)
per minute = 77 minutes
at approx. 1.85 US gal (7 litres)
per minute = 44 minutes.
Sweeping, wet scrubbing,
vacuum drying
●
drive Hakomatic 1100 as described
on page 66
●
select a cleaning program on control
panel A.
Some examples overleaf.
68
2
3
1
