PowerBoss Admiral 36, User Manual, Page: 8 / 36

Installation of battery
Battery system A and B
How to install the tray-type batteries
24 V / 320 Ah or 24 V / 280 Ah
●
Open the doors at the left and right
side
●
Tilt the driver seat upwards to the
right
●
Dismount brace (1) at the left side
(4 screws)
●
Remove plug of the seat switch line
●
Dismount brace (5) including seat at
the right side and set aside (do not
remove belt)
●
Swivel device plug
●
Place tray battery (4) by means of a
lifting unit or a fork-lift truck into the
machine from the left side.
Note: Only use lifting and trans-
porting facilities e.g. lifting tackle
according to VDI 3616. Cells,
connectors or cables must not be
damaged by usage of hooks.
●
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41 and 42.
●
Link battery and device plugs (pay
attention to tight fit)
●
Mount left brace (1) and brace (5)
including driver seat
●
Connect the line to seat switch.
●
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order
Battery system C and D
●
Open the doors at the left and right
side
●
Tilt the driver seat upwards to the
right
●
Place the batteries 6 V/180 Ah or
6 V/240 Ah into the battery com-
partment and connect the poles
with the battery lines
●
Check the coding of battery, device
and charger plugs and modify as
required according to the instruc-
tions on page 41
●
Close side doors and tilt the driver
seat downwards
Proceed to dismounting in inverse
order.
8
1 Brace
2 Device plug
3 Battery plug
4 Tray-type battery
5 Brace including driver seat
1
2
5
4
3