PowerBoss Admiral 36, User Manual, Page: 24 / 36

Installation/Removal
of squeegee
●
Lower squeegee and turn OFF the
key switch
●
Push squeegee with the threaded
pins into the corresponding slits at
the squeegee holder (V/4)
●
Place washers and fasten squeegee
using the nuts with the toothed
washers (V/2)
●
Place suction hose ((V/1) at the
socket of the squeegee.
Removal is performed in inverse
order.
Electrical equipment
The electrical equipment of the
Admiral 36
uses a tension of 24 V.
Three types of battery systems may
be used (refer to ”Battery systems”,
page 39).
Towing
If the Admiral 36 has to be towed e.g.
due to discharged batteries or faulty
drive assembly, proceed as follows:
●
Remove the front right and left
bolts and the deflector rollers
●
Pull the belt through the lower
holes for the bolts
Note: Tow the Admiral 36 at a speed
of max. 2 km/h and for a short
distance only. Otherwise the drive
motor may be damaged. If the
machine is pushed too fast, the drive
24
V
1 Suction hose
2 Nuts with toothed washers for
squeegee fixing
3 Knurled nuts for sealing strips
4 Squeegee holder
Note: The rubber strap located at the rear
fender is used to fasten the suction hose
in case of dismounted squeegee.
1
4
3
2