Generating Power to the World
Page
13
of
25
PTI-15/20-T4F Operators Manual
Operating the Generator
Daily Pre Operational Checks
•
Check the engine oil level to be appropriate level
•
Check for tightness of battery cables/terminals.
•
Check battery terminals for absence of corrosion
•
Check coolant level for proper Fill (add if necessary)
•
Check for absence of water in fuel (drain if necessary)
•
Check for absence of DTC or failures
•
Check for absence of excessive fan belt looseness
Using the PTG Series Controller
The LCD display is the primary source of information of the controller. The LCD
allows you to view/change settings and monitor the status of sensors and other
engine parameters.
* NOTE: The genset mounted controller must be in “AUTO” mode in order to enable the remote
panel functionality.
