Page 6
1.5
–
ATTACHMENT NODE :
For your safety check the fastening node of the seat belt (or
harness) which must be double.
The loop must pass TWICE through the ring as shown on
figure 1 :
Figure 1 : seat belt
1.6
–
TRANSPORT OF THE CHAIR BY CAR:
The wheelchair can only be transported when it is empty. It shall be securely secured to the vehicle by means of the
4 anchorage points on the chassis and rudder (see figue 1 & 2).
Figure 1 rocking lever anchor ring
Figure 2 : rear motorization ring
To transport the chair in a vehicle, the footprint can be reduced by folding down the backrest and footrest pallet (see
chapitre II).
Warning
After each reassembly of the chair, it is imperative to check the correct locking of the elements, before any
new use
.
Warning
The chair can in no case be used as a vehicle seat
