Page 31
The speed slider
Figure 58 : speed slider
The speed slider is adjusted by the user to reduce the
maximum speed of the selected drive function. The
proportion of green and yellow zones ( and
in
4.5) is the position of this cursor. Move the slider down
to reduce the available speed. When the available
speed decreases, the green zone decreases and the
yellow zone increases (Figure 59).
Move the slider up to increase the available speed. As the available speed increases, the green zone increases and
the yellow zone decreases. (Figure 59).
Figure 59 : Using the speed slider (minimum setting, left and maximum setting, right
)
To set the speed slider to drag-and-touch mode, press and hold the speed slider and drag it up or down. Release the
cursor to the desired set point (see Figure 60).
To set the speed slider to simple keystroke mode, press at the top of the speed slider to increase the set point, and
press at the bottom of the speed slider to reduce the set point. In simple keystroke mode, the plus and minus symbols
are displayed on the speed slider to indicate where to press (see Figure 61).
Figure 60 : Adjusting the speed slider in swipe-and-tap mode
Figure 61 : Adjusting the speed slider in mode tap-only
