12
It is the same with the installation of the front cover. (Refer”to install the UPS”)
h)
Verify that all wires connected between the UPS and EBP(s) are installedbehind the
front covers and not accessible to users.
i)
Return to Step4 to continue the UPS installation.
Rackmountconverted to Tower Installation
（1）Rackmountconverted to Tower plasticbase installation
① Two plastic base brackets
② Flatten it after intercrossing
Intercross as following Figure:
Figure 11 plasticbase installation
③If anEBP is needed to be placed in the middle, the assembly of plastic base is
similar
(
Figure 11 ).The difference is that two 1U plastic base extended boards are added
in the middle.(as the following shows)
（A） （B）
