9
Figure5Extract UPS front cover
CAUTION
A small amount of arcing may occur when connecting the internal batteries. This is
normal and will not harm personnel. Connect the cables quickly and firmly
b)
Connect the internal battery connector(see Figure6)
Connect red to red, Press the connector tightly together to ensure a proper connection.
c)
If you are installing EBPS,see the following section, “Connectingthe EBP(s),”
before continuing with the UPS installation.
Figure6Connecting the UPS Internal Batteries
d)
Replace the UPS front cover.
To replace the cover, verify that the ribbon cable is protected and (ifEBPS are installed)
the EBP cable is routed through the knockouton the bottom of the cover.
Put the front cover hooks of side with display to the cover port, put another side to the
other two ports, then press it until the cover and the chassis are combined tightly.
