3.
Never force the cut-off tool. Excessive pressure could break the tool,
resulting in damage to your workpiece or serious personal injury.
Excessive pressure is the cause if your tool runs smoothly under no load,
but roughly under load.
4.
Position the cut-off tool's safety guard over the cut-off wheel when not in
use.
5.
Check if the cut-off tool's moving parts are misaligned or binding before
each use. Correct the issue before using the cut-off tool to avoid an injury
or damage to the tool.
6.
Always be aware of the position of your hands relative to the cut-off tool.
Avoid awkward hand positions where a sudden slip could cause a hand to
move into the cut-off wheel. Never reach behind or beneath the cut-off
tool.
7.
Only use accessories that are specifically designed for use with the cut-off
tool. Ensure the cut-off wheel is tightly installed.
8.
Only use the cut-off wheel that exceeds the Speed rating (see
Specifications).
9.
Before using the cut-off tool on a workpiece, test the cut-off tool by
running it at the highest speed rating for at least 30 seconds in a safe
position. Stop immediately if there is any abnormal vibration or wobbling.
Check the tool to determine the cause.
10. Never touch the cut-off wheel or workpiece during or immediately after
use. They may be hot and could inflict a burn injury.
11. The material and the motor housing can get very hot during operation.
Stop work until the cut-off tool and the cut-off wheel both cool down to a
safe temperature.
12. Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
13. Never use a tool with a cut-off wheel that is cracked or worn. Change the
cut-off wheel before using it.
14. Do not place the cut-off tool down until the cut-off wheel has stopped
moving. The cut-off tool may catch the surface of work material and
wrench itself free, causing injury to the user or others in the work area.
9004391
EXTENDED REACH AIR CUT-OFF TOOL
V1.0
www.princessauto.com / 1-800-665-8685
Page 8
