NOTICE!
This notice indicates that a specific hazard or unsafe practice will result in
equipment or property damage, but not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away from
the work area.
3.
Store unused tools properly in a dry, safe and secure location to prevent
rust, damage or misuse.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear the appropriate type of full-face shield in addition to safety googles,
as the work can create chips, abrasive or particulate matter.
3.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a.
Do not wear gloves when operating a tool that can snag the material
and pull the hand into the tool.
4.
Wear protective clothing and gloves designed for the work environment,
materials and tools.
5.
Non-skid footwear is recommended to maintain footing and balance in the
work environment
6.
Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
7.
Wear the appropriate rated dust mask or respirator. Wear a NIOSH
approved respirator when working on materials that produce hazardous
fumes, dust or particulate matter.
9004391
EXTENDED REACH AIR CUT-OFF TOOL
V1.0
www.princessauto.com / 1-800-665-8685
Page 4
