V1.0
Hand Crank Air Hose Reel
8880940
Visit www.princessauto.com for more information
5
2. Insert the handle into the link lever opening (#5). Secure the handle with
the washer (#6) and nut (#7). Tighten the nut. Rotate the handle a few
times to ensure it is functioning correctly.
3.
Mount the base (#9) on a structure capable of withstanding the weight of
the hose reel and air hose. Use the base as a template for marking the
screw locations.
4.
Mount the air hose reel using 4 washers and 4 screws suitable for the
structural material.
5.
Connect the swivel valve (#18) to the compressor’s air hose.
a.
Wrap the external threads of the air hose. Wrap tape in a clockwise
direction so it will not unravel.
b. Do not tape all the threads. Leave several leading threads unwrapped
for easier alignment.
c.
Screw the air supply hose into the swivel valve (#18) and tighten with
a wrench until snug. Use a second wrench on the swivel valve to hold
it still to prevent damage from twisting.
6. Wrap the air hose threads with sealant tape, as in step 5 a and b. Screw
the hose into the outlet valve (#15).
7.
Wrap the air hose over the reel (#14) end and guide it on by hand as you
rotate the handle. Do not allow the air hose to cross-wrap.
CARE & MAINTENANCE
CAUTION! Bleed air pressure from the hose system before servicing the reel.
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or replaced by an
authorized technician. Only use identical replacement parts when servicing.
3.
Only use accessories intended for use with this tool.
4.
Keep the tool handles clean, dry and free from oil/grease at all times.
5.
Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Wipe the surface with a clean, moist cloth.
