V4.0
LED 500 Lumen Work Light with Cord Reel
8863409
Visit www.princessauto.com for more information
9
WORK LIGHT OPERATION
1. Use both hooks, one at the top of the light and one at the base of the
handle to hang the light in a horizontal position.
2. To attach the light to a vehicle, slide the magnet holder clip onto the neck
of the light and place the face of the magnet in the desired position on the
car. Turn on the light.
ELECTRIC TOOL USE
You can plug an electric tool into the built-in outlet on the light to use the reel
cord as an extension cord. Do not exceed the maximum amperage of the reel or
overheating may result.
CIRCUIT BREAKER
The circuit breaker installed on the lead-in power cord will trip when the LED
light or the connected power tool receives excessive current. Wait for a short
period of time before pressing the circuit breaker’s button to re-establish the
connection.
If the circuit breaker trips a second time, unplug the cord reel’s power cord and
determine the cause of the excessive current.
CARE & MAINTENANCE
DANGER! DO NOT open the casing for any reason. The spring inside is under
high tension and accidental release can result in death or severe personal
injury. Only a qualified technician can service the coil assembly
WARNING! Unplug the power source before cleaning the cord and allow the
cord and connections to thoroughly dry before plugging the cord back into a
power outlet. Failure to do so could result in electrocution.
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Only use accessories intended for use with this tool.
