V4.0
LED 500 Lumen Work Light with Cord Reel
8863409
Visit www.princessauto.com for more information
7
4. Prevent damage to the power cord by observing the following:
a. Do not pull on the cord to disconnect the plug from an outlet.
b. Keep the cord away from heat, oil, sharp edges or moving parts.
c. Never use the cord to carry the tool.
d. Place the electrical cord in a position that prevents it from coming into
contact with the tool and getting caught by the workpiece. The cord
should always stay behind the tool.
5. Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
a. Position power cords away from traffic areas.
b. Place cords in reinforced conduits or place planks on either side of
the power cord to create a protective trench.
6. Do not wrap the cord around the tool, as sharp edges may cut insulation or
cause cracks if wound too tight. Gently coil cord and either hang on a hook
or fasten with a device to keep cord together during storage.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
This cord reel is intended for industrial use and is provided with permanent
mounting means. This equipment should be properly installed before use in
accordance with local codes and ordinances.
1. Select an indoor wall or ceiling location to mount the reel. If mounting on
the ceiling, the reel must be within 1 foot of an electrical outlet. If mounting
on a wall, the reel must be within 2 feet of an electrical outlet.
