V4.1
1/2 in. Spade Handle Electric Drill
8548588
Visit www.princessauto.com for more information
7
9. Only use accessories that are specifically designed for use with the tool.
Ensure the accessory is tightly installed.
10. Only use an accessory that exceeds the No Load Speed rating (see
Specifications).
11. Never point the tool towards yourself.
KICKBACK PRECAUTIONS
Kickback is a sudden reaction to a snagged bit. This can inflict a serious injury on
the user or a bystander. Kickback can also damage the tool or workpiece.
Kickback can be avoided by taking proper precautions:
1. Maintain a firm grip on the tool and position your body and arms to allow
you to resist a kickback. Kickback will force the tool in the direction
opposite to the direction of rotation. A snagged bit may pull the tool out of
the grasp of the user.
2. If kickback occurs:
a. The bit may pass over a body part, causing a serious injury;
b. A bit may wrench the user’s arm causing muscle or joint injuries; and
c. The tool may strike bystanders.
3. Use clamps or a vice to hold down smaller workpieces.
4. Use special care when working on corners, sharp edges or flexible
material. These workpieces have a tendency to snag the cutting accessory.
5. Only use bits designed for the tool.
ELECTRICAL SAFETY
WARNING!
Do not touch or handle a live tool with any part of your body that
is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
WARNING!
To reduce risk of electric shock, be certain that the plug is
connected to a properly
grounded receptacle.
1. Disconnect tool from power source before cleaning, servicing, changing
parts/accessories or when not in use.