8548588
1/2 in. Spade Handle Electric Drill
V4.1
10
For technical questions call 1-800-665-8685
6. Do not wrap cord around the tool as sharp edges may cut insulation or
cause cracks if wound too tight. Gently coil cord and either hang on a hook
or fasten with a device to keep cord together during storage.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
Contents:
• Drill
• Chuck Key
• Side Handle
• Rear Handle
• Rear Handle Screw
IDENTIFICATION KEY
A 3-Position Side Handle
B 1/2 in. Chuck
C Die Cast Aluminum Gear Housing
D Variable Speed Dial
E Trigger Switch
F
Rubberized Non-slip Handle
G Trigger Lock
H 2-Position Spade Handle
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List. Letter
references in parenthesis (A) refer to the included Identification Key.
You may choose to install the optional side and spade handle onto the drill. The
drill can be used without either, but using the optional handles will allow greater
control of the tool.
1. Insert the side handle (#29) into the screw hole on the top, left or right side
of the middle cover (#18).