8548588
1/2 in. Spade Handle Electric Drill
V4.1
6
For technical questions call 1-800-665-8685
10. Never attempt to change the rotation direction while the switch is ON. To
do so, may damage the interlock feature built into the switch. Be sure the
switch is OFF and the motor has completely stopped before changing the
rotation direction.
11. Do not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
12. Hardened gum and wood pitch on a bit slows the tool down and increases
the potential for binding. Remove the bit from the tool, then clean it with
hot water, kerosene or gum and pitch remover. Never use gasoline. Allow
to dry before using. Discard the bit if the gum or pitch cannot be removed.
POWER TOOL PRECAUTIONS
1. DO NOT use any power tool with a malfunctioning power switch or control.
A power tool that fails to respond to the controls is dangerous and could
cause an injury. A qualified technician must repair and verify the power tool
is operating correctly before it can be used.
2. Do not allow the tool to run without load for an extended period of time, as
this will shorten its life.
3. Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
4. Avoid unintentional starting. Ensure the switch is off when connecting to
the power source.
5. After making adjustments, make sure that any adjustment devices are
securely tightened.
6. Remove adjusting keys and wrenches before using the tool. The tool may eject
an attached wrench or a key and cause an injury to you or a bystander.
7. Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. If your tool runs
smoothly under no load, but does not run smoothly under load, then
excessive pressure is being used.
8. Do not touch an operating motor. Motors can operate at high temperatures
and can cause a burn injury.