POWER ELECTRONICS
SD700FL SERIES
RECEPTION, HANDLING AND TRANSPORTATION
19
To unpack, if necessary, unscrew the bolts that fix the wooden or the cardboard box with the pallet. Then,
unscrew all the fixation screws of the L shapes. To rise to an upright position use a crane or forklift
equipped with belts or slings. Lift it carefully pulling from the top eyebolts.
CAUTION
Do not lift the frame 5 on VSD from the eyebolts placed on the top part under any circumstance,
it
could lead to people injury and cause damage to the equipment.
SD700FL frames 1 to 4 can be lifted using the top M8 eyebolts.
Once it is upright positioned, reallocate the belts/slings. The forklift or crane lifts the drive pulling from the
bottom part. In the case of using a crane, protect the belts/slings contact zones with protective foam.
Avoid brusque movements and shocks during transportation. At the time of placing the drive on the floor,
stop lowering it just before reaching the floor and then slowly lower it on the floor to avoid any shock.
Figure 4.1 Lifting
During handling and transportation, the goods should not be exposed to moisture, overturned, inverted,
tilted or impacted. The tilting angle should be no more than 30º.
