6
Powercraft
PARTS LIST PTZ-600
REF. NR.
DESCRIPTION
PC
1
FIXED SHEET
407101
2
GUIDE
407102
3
KNOB
407455
5 TILL 7
UPPER SAFEGUARD COMPLETE
407103
10
RIVING KNIFE
407104
13
FOOT
407105
16
KNOB
407456
24+25
LOWER SAFEGUARD WITH COVER
407106
28
WATER TANK
407107
29
INNER FLANGE
407108
30
DIAMOND CUTTING DISC 180X22,2X2,2
TCA1004
31
OUTER FLANGE
407109
32
NUT
407110
33
ANGLE GUIDE
407111
34
SWITCH
407112
TILE CUTTER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2.
TECHNICAL SPECIFICATIONS
CONTENT OF THE BOX
1 Tile cutter
1 Water tray
1 Full-length adjustable fence
1 Mitre guide
1 Set of instructions
1 Safety instructions
1 Guarantee card
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
When using electric tools, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and personal injury. Read all these
instructions before attempting to operate this product
and save these instructions.
Always check that the voltage corresponds to the
voltage on the rating plate.
REPLACING CABLES OR PLUGS
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm
2
. When using a cable reel always unwind
the reel completely.
SAFETY MEASURES
•
Check your powertool for damage before starting
your work, particularly the diamond blade. All parts
must be fitted properly and must meet all
requirements in order to guarantee the tool’s
smooth operation. Any safety guards or any lightly
damaged parts must be checked to see if they still
function properly before continuing the use of the
tool. Moving parts, and the diamond-blade guard in
particular, must be fitted properly and must not jam.
Do not use tools that cannot be switched on or off
with the switch.
•
The diamond-blade guard must not be jammed or
removed.
•
A jamming guard must be repaired immediately.
•
The riving knife must not be removed.
USE
This tool is suitable for cutting various wall and floor tiles
with a maximum tile size of 500 x 500 x 35mm. The
diamond wheel can be replaced by the customer. It is not
permitted to use the tool for any other materials.
ASSEMBLY
Fig.1
1. Mounting the riving knife
•
Unscrew the two (crosshead) screws (9) and place
the foot of the riving knife (10) under the table
•
Place the small plate (2 holes with thread) under the
foot of the riving knife
•
Connect the riving knife with the two screws and the
plate
2. Mounting the saw blade
•
Unscrew two screws out of lower blade guard and
remove the guard
•
Dismount nut (counterclockwise) and outer flange
•
Place blade on the inner flange
•
Mount outer flange and nut (clockwise) again
•
Place the lower blade guard back in position and
connect the two screws
3. Mounting the upper blade guard (11)
•
Slide the guard in horizontal position across the
riving knife.
•
Connect the guard to the riving knife with the bolt
(12) and the locknut
•
Be aware that the guard is connected under the lock-
pin (13). The lock-pin prevents the guard falling
backwards.
Voltage
| 230 V~
Frequency
| 50 Hz
Power consumption
| 600 W
| S2= 30 min
No load speed
| 2,800/min
Max. depth of cut 90º
| 35mm
Max. depth of cut 45º
| 20mm
Cutting angle
| 0 - 45°
Ø Cutting blade
| 180x22.2x2.2mm
Table dimensions
| 360 x 330mm
Lpa (sound pressure level)
| 63.08 dB(A)
Lwa (sound power level)
| 76.08 dB(A)
Vibration
| 1.34 m/s
2
Powercraft
3
