Power Craft PBF-1050E, User Manual

Page: 3 / 8

14 Powercraft
SPARE PARTS LIST PBF-1050E
REF NR DESCRIPTION POWERCRAFT NR
4 SPEED REGULATOR 302100
5 DEPTH KNOB 302101
6 COPPE BUSH 312004
8 BRUSH HOLDER 312004
9 ENCLOSURE 312002
17 SWITCH 302057
18 PULL-BACK BAR 302102
19 SWITCH ACTUATOR 302103
23 STATOR 302104
27 BEARING 60018 800608
28 ROTOR 302105
31 BEARING 80103 806003
33 SPRING FOR COLLET 302106
34A COLLET 312008
34A COLLET 312012
35 CHUCK NUT 312009
36 RUBBER CAP FOR HANDLE 302058
39 LOCKING LEVER 302002
42 GEAR 302107
43 BLOCK STOP 302107
44 SPEED REGULATOR 302107
46 RACK BAR 302108
47 HANDLE 302058
51 ROTARY SWITCH 302109
54 PAWL SPRING 302110
55 BRAKE RACK 302110
57 BUTTON FOR BRAKE RACK 302110
62 DUST TUBE 302111
72 SCREW 302112
73 SPING 302112
74 PLASTIC BOTTOM PLATE 302113
78 ROD B 302005
79 ROD A(WITH SCALE) 302005
80 GUIDE FRAME 302114
81 SPRING WASHER 302005
82 HOLLOW-HEAD SCREW 302005
84 PLASTIC LINER 302115
86 WRENCH 312011
87 SCALE PLATE 302107
PLUNGE ROUTER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1 Router
10 Cutters (router bits)
1 Parallel
guide
1 Template guide
2 Screws
2 Nuts
1 Adapter for dust extraction
1
Dust tube
1 Wrench
1 Instruction
manual
1 Guarantee card
Check the machine, loose parts and accessories for transport
damage.
PRODUCT INFORMATION
Fig. A
The PBF-1050E router has been designed for professional
routing of wood, wood products and plastics.
1
On/off switch
2 Handle
3 Router base
4 Locking bolt for parallel guide
5 Opening for parallel guide
6 Collet nut
7 Spindle lock
8 Revolver-depth stop
9 Locking bolt depth stop
10 Depth stop
11 Clamping lever
12 Scale cutting depth
13 Adjusting wheel electronic speed control
14 Height adjusting button
15 Adapter for extracting dust
16 Dust outlet (Fig.F)
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for use:
Denotes risk of personal injury, loss of life or damage to
the tool in case of non-observance of the instructions in
this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine. Make sure
that you know how the machine functions and how to operate
it. Maintain the machine in accordance with the instructions to
make sure it functions properly. Keep this manual and the
enclosed documentation with the machine.
ATTENTION!
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury. Read the
following safety instructions and also the enclosed safety
instructions.
Keep these instructions in a safe place!
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well lit. Do
not use power tools in presence of flammable liquids or
gases.
3. Guard against electric shock.
Prevent body contact with grounded surfaces (e.g. pipes,
radiators, refrigerators).
4. Keep visitors away.
Visitors should be kept away from the work area at all
times. Do not let visitors handle the Electric Rotary
Hammer Drill at any time.
5. Store unused tools.
When not is use keep tools out of reach of children. Store
in a dry and secure location.
6. Do not force tool.
Do not apply undue pressure as this may affect
performance and may cause damage to the machine.
Forcing the job also increases the potential for accidents.
7. Use right tool.
Do not force small tools or attachments to do the job of
heavy duty tool. Do not use a tool for purposes not
intended.
8. Dress properly.
Do not wear loose clothing or Jewellery. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
9. Use safety glasses.
Also use face or dust mask when operation is dusty.
10. Connect dust extraction equipment
If devices are provided for the connection of dust
extraction and collection facilities ensure these are
connected and properly used.
11. Do not abuse cord.
Never carry tool by cord or yank it to disconnect it from
electrical socket. Keep cord from heat, oil and sharp edges.
12. Secure work.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1050 W
No load speed/min | 9000-30000
Max. cutter diameter | 30 mm
Cutting depth | 30 mm
Collet | 6 & 8 mm
Weight | 3.28 kg
Lpa (sound pressure) | 89.0 dB(A)
Lwa (sound power) | 102.0 dB(A)
Vibration value | 4.3 m/s 2
Powercraft 3