35
ENGLISH
USER MANUAL
Fitting the bevel guide
Push the bevel guide (11) into one of the rails on
the workbench. The guide rail (34) must be set so
it is just clear of the saw blade. Secure the guide
rail using the screws (35) as shown in figure 9.
Fitting the parallel guide
The parallel guide can be positioned on the right
or left side of the saw blade and makes the saw
ideal for longitudinal cutting.
Push two bolts (40) into one of the profiles on the
parallel guide and secure them at the handle’s
recesses (41) by means of the finger screws (42) as
shown in figures 10 and 11. Note that the parallel
guide can be turned two different ways so it is
either wide or narrow.
Figure 9
Figure 10
Figure 11
Push the handle into the cross rail at the end of
the saw and secure the parallel guide by turning
the handle (2) as shown in figure 12.
Figure 12
