33
ENGLISH
USER MANUAL
Connect the pairs of legs using the long frame
pieces (20) and secure them with screws, washers
and nuts (21) as shown in figure 2. The frame is
now assembled and joined together with the legs.
Position a short cross rail (22) in place between
two legs, so the screw holes are lined up. Screw the
cross rail to the legs using screws, washers and
nuts (23), but do not tighten them too much.
Repeat this with the other short cross rail as shown
in figure 3.
Figure 2
Position a long cross rail (24) in place between
two legs, so the screw holes are lined up. Screw the
cross rail to the legs using screws, washers and
nuts (25), but do not tighten them too much.
Repeat this with the other long cross rail as shown
in figure 4.
Tighten all screws and nuts, and turn the frame
right way up. Check that the frame is stable.
Installing the saw on the frame
Position the table saw on the frame so the screw
holes are lined up and secure it using screws,
washers and nuts (26) as shown in figure 5.
Figure 3
Figure 4
Figure 5
