![background image](http://html.mh-extra.com/html/power-craft/89040/89040_instruction-manual_1586314019.webp)
19
ENGLISH
INSTRUCTION MANUAL
Technical Data
Max output:
300 ml/min
Max. adhesiveness:
80 DIN-s
Max. pressure:
160 bar.
Power source:
230 volt ~50 Hz
Power output.
120 Watt.
Double insulation.
Volume capacity:
1,000 ml.
Pump cylinder
Special mixing
Pump cylinder
Special steel. 5 min. diameter
Pump nozzle
0.8 mm.
Sound pressure max.
90 dB
Use
Congratulations on the purchase of your
Powercraft spray gun.
Before use, please read this manually carefully.
Keep the manual in a safe place for future reference.
This apparatus requires careful cleaning and
maintenance for optimum function.
IMPORTANT: Always clean thoroughly after use.
Failure to do so will affect performance and
invalidate the guarantee.
Safety instructions
NOTE: Do not point at other people or animals.
Doing so entails a high risk of injury.
If paint or solvents come in contact with the
skin, seek medical help immediately and advise
the doctor of the type of paint or solvents
involved.
•
For use with paint and solvents with a
flashpoint over 21º C. (32 °C in the UK) only.
•
Indoor use: Ensure adequate ventilation.
•
Naked flames and smoking during use are
strictly forbidden.
•
Not a toy! Keep well away from children and
do not allow them to play with it.
•
Always disconnect from mains electricity
before performing any type of cleaning or
maintenance.
•
Never use for inflammable liquids.
•
Never clean with inflammable liquids.
•
Check carefully the content of liquids used.
(See manufacturer’s recommendations)
•
Never use liquids with properties you are
unsure of.
General safety instructions
WARNING!
When using electrical tools, always take
precautions to reduce the risk of fire, electric
shock and personal injury, including:
1. Keep work area clean. Cluttered, dirty work
areas cause accidents.
2. Check work area before starting. Do not expose
to rain. Do not use in damp or humid areas.
Do not use if there is any risk of fire or
explosion.
3. Protect against electric shock. Avoid coming
in contact with earthed surfaces, such as pipes,
radiators and fridges.
4. Keep well away from children. Do not allow
others to touch the tool or cable.
All visitors should be kept away from work
place.
5. Unused tools should be stored in a dry, safe
place, well out of the reach of children.
6. Do not overload. The tool will perform better
and more safely if the use of force is avoided.
7. Use right tool Do not force a tool which is too
small to do the work of a large tool.
8. Wear the right clothing. Never wear loose-
fitting clothes or jewellery, as they can get
caught in the moving parts. Rubber gloves
and non-slip footwear are recommended for
working outdoors. Hairnets are recommended
for long hair.
Summary of Contents for 89040
Page 27: ...27 2 3 4 1 5 6 7 8 ILLUSTRATIONS ...
Page 28: ...28 9 10 11 12 ILLUSTRATIONS ...