background image

HELPLINE No. U K  0905-1460005 •  IRELAND 1520-932626

WEB SUPPORT: www.heltec.eu

03

Introduction

Congratulations on choosing to buy a
Powercraft Product

By doing so you now have the assurance and peace of mind that comes with
purchasing a product made by one of Europe’s leading manufacturers.

All products brought to you by PowerCraft are manufactured to the highest
standards of performances and safety, and, as part of our philosophy for
customer service and satisfaction, are backed by our comprehensive 
3 Year Warranty.

We hope you will enjoy using your purchase for many years to come.

CORDLESS HAMMER DRILL

For your own safety and that of others, we recommend that you
read this instruction manual carefully before using this machine.
Keep this instruction manual and the documentation provided
with the machine for future reference.

Contents of packing

1 Cordless hammer drill
1 Battery
1 Battery charger
2 Double-sided bits (Philips / slotted)
1 Users manual
1 After sales support card
1 Quick set-up guide

Check the appliance, any loose parts and accessories for damage caused
during transport.

HELPLINE No. U K 0905-1460005 •  IRELAND 1520-932626

WEB SUPPORT: www.heltec.eu

22

Exploded view

Summary of Contents for 14.4 Volt CORDLESS HAMMER DRILL













Reviews: