Installation and Operating Instructions PBX-200 PB / Li
page 22
7.6
Use as backup system (UPS)
Figure 16: Interconnection of the Power-Blox as a pure backup unit
If you are using the Power-Blox as an interruption-free power supply, simply connect it to the
power outlet using the supplied power cord and use the integrated sockets (1) to feed your
appliances. In the event of a power failure, the devices are fed by the internal battery.
7.7
Combined solar / mains system with connection to the terminal block
Figure 17: Single solar system wired via terminal blocks
The terminal blocks allow you to build the solar system with standard wiring and wires. In the
schematic diagram shown, the solar module was connected to the terminal block (19) and the
public network to terminal (18).
