Installation and Operating Instructions PBX-200 PB / Li
page 20
After connection to the clamping block, the cable can be secured to the strain relief web (20) by
means of a cable tie.
Figure 12: Securing the cable with a cable tie on the strain relief bar
To feed the cable from the Power-Blox, the Power-Blox break-out tabs are provided in the
installation cover. In this case, break out a tab at a suitable location, for example with a side
cutter or a Japanese knife:
Figure 13: Tighten the tab to the cable entry
After completion of all installation work on the terminal blocks, close the installation flap and
secure it with the retaining screws (A) and (B).
