ENGLISH | 5
STEAM CLEANING ACCESSORIES
WARNING: Do not try to connect accessories while unit is emitting steam.
EXTENSION WANDS
1.
Select one of the Extension Wands. Insert end (A) of Wand onto Main Nozzle (B) with yellow
lock/release button slightly off center with hole. Fully insert and rotate wand slightly to allow
button to snap into hole.
2.
Using the same instruction, attach remaining Extension Wand to the first Wand. Both Exten-
sion Wands should now be connected to the Main Nozzle.
MOP HEAD
1.
Align Mop Head with open end of Extension Wand, so that hole in Mop Head aligns with yel-
low lock/release button on Wand.
2.
Press down on yellow lock/release button. While continuing to hold button down, slide Mop
Head onto Extension Wand (See figure 1-A). Fully insert and rotate wand slightly until button
snaps through hole (See figure 1-B).
NOTE: Do not use excessive force when mopping or using Extension Wands as this
may cause the Wands to break.
Assembling Your
Portable Power Steam Cleaner
B
C
A
FIGURE 1
A
B
