background image

ENGLISH | 3

16.

 To reduce risk of contact with hot water emitting from Main Nozzle, check appliance before 

each use by positioning it away from body and turning it on. Do not operate unit if Main Nozzle 

is blocked.

17.

 Burns can occur from touching hot metal parts, hot water, or steam. Do not touch Main Nozzle or 

attempt to connect accessories while unit is in use. Do not touch bottom of Mop Head or attempt 

to attach a Microfiber Pad by hand while unit is in use. Use caution when you turn unit upside-down 

– there may be hot water in Reservoir.

18.

 Use caution when using unit on uneven surfaces, such as stairs.

19.

 When steaming any surface for the first time, it is recommended that you consult the manufacturer’s 

guidelines for material being steamed. For items in question, test on an inconspicuous area 

before proceeding.

20.

 Steaming unsealed hardwood or unglazed ceramic surfaces is not recommended, and may result in 

warping or damage to the surface. Steam may remove the sheen from surfaces treated with wax.

21.

 When steam mopping, never leave unit resting in one spot on any surface for any period of  time – 

prolonged exposure to heat and moisture may damage floor surfaces.

22.

 Do not allow power cord to touch hot surfaces during use. Bundle cord loosely when storing.

23.

 Always allow unit to cool (at least 30 minutes for complete cooling) and empty Reservoir before 

storing. Do not store unit with a damp Microfiber Pad still attached.

24.

 This product for use on 120 volt electrical outlets. The cord has a plug as shown at A in Figure 

65.1. An adapter, as shown at C, can be used to connect three-blade grounding-type plugs to 

two-slot receptacles (it is not included with your product). The green grounding lug extending from 

the adapter must be connected to a permanent ground such as a properly grounded outlet box. 

An adapter should not be used if a three-slot grounded receptacle is available. *NOTE: A TWO-

PRONG ADAPTOR IS NOT INCLUDED WITH THIS PRODUCT.

FCC CONSUMER ADVISEMENT:

 This equipment may generate, use and/or radiate radio frequency 

energy that may cause harmful interference to radio communications. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to contact Poulan Pro Consumer Service at 1-800-

711-6617. Changes or modification to this unit not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

SAVE THESE INSTRUCTIONS

Figure 65.1

Questions or comments?

 

poulanprosteam.com

• 

[email protected]

 

1-800-711-6617

Speak your mind! We invite you to review this product online:

poulanprosteam.com/reviews

Summary of Contents for PP270
















Reviews: