Poulan Pro 421102, Owner'S Manual

Page: 21 / 40

21
REPAIR PARTS
SNOW THROWER - MODEL
961940007
(96194000700)
AUGER HOUSING / IMPELLER ASSEMBLY
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
1 175321X479 IMPELLER
2 196710 GEARBOX ASSEMBLY
3 188909 BEARING
4 191079 IMPELLER PULLEY
5 175322 DISCHARGE BASE
6 178675X008 CORNER BRACKET
7 192199 CLEAN OUT TOOL
8 405400 TOOL CLIP
9 73800400 NUT 1/4 − 20
10 74780426 SCREW 1/4 − 20 X .625
11 155377 NUT 5/16 − 18
12 163183 SCREW 5/16 − 18 X .625
13 19111507 WASHER
14 10040500 LOCKWASHER 5/16
15 74940516 SCREW 5/16 − 18 X 1.00
16 180355 CARRIAGE BOLT
17 194189 SCREW 13 − 16 X .625
18 407760 PLUG
19 407761 GEARBOX COVER RH
20 407766 GASKET
21 407770 SEAL
22 407762 BEARING
23 174697 THRUST WASHER 1.00
24 407763 WORM GEAR
25 407764 AUGER SHAFT
26 189282 SQUARE KEY
27 407758 BEARING
28 174683 THRUST WASHER
29 407757 IMPELLER SHAFT
30 7836M ROLL PIN
31 174681 THRUST WASHER
32 174684 THRUST BEARING
33 407769 BEARING
34 407768 O − RING
35 407767 SCREW 5/16 − 18 X .750
36 407765 GEARBOX COVER LH
KEY PART
NO. NO. DESCRIPTION