Pottinger ROLLPROFI 6165, Operator'S Manual

Page: 3 / 216

Dokument
D
GB-0100 Dokum D Anhänger
- 3
ALOIS PÖTTINGER Maschinenfabrik GmbH
A-4710 Grieskirchen
Tel. (07248) 600 -0
Telefax (07248) 600-511
GEBR. PÖTTINGER GMBH
D-86899 Landsberg/Lech, Spöttinger-Straße 24
Telefon (0 81 91) 92 99-111 / 112
Telefax (0 81 91) 92 99-188
GEBR. PÖTTINGER GMBH
Servicezentrum
D-86899 Landsberg/Lech, Spöttinger-Straße 24
Telefon (0 81 91) 92 99-130 / 231
Telefax (0 81 91) 59 656
❑
Machine checked according to delivery note. All
attached parts removed. All safety equipment, drive
shaft and operating devices at hand.
❑
Operation and maintenance of machine and/or
implement according to operating instructions
explained to the customer.
❑
Tyres checked re. correct pressure.
❑
Wheel nuts checked re. tightness.
❑
Drive shaft cut to correct lenght.
❑
Correct power-take-off speed indicated.
❑
Mechanical functions (opening of rear gate, pivoting
of cutting mechanism out/in, etc.) demonstrated and
explained.
❑
Removing and mounting of knives explained.
❑
Electrical connection to tractor established and
checked re. correct supply (54 g connected). Note
references in operating manual.
❑
Fitting to tractor carried out: hight of drawbar
adjusted, brake cable installed, hand brake lever
assembled in tractor cabin.
Please check. X
According to the product liability please check the above mentioned items.
INSTRUCTIONS FOR
PRODUCT DELIVERY
GB
❑
Function of electrical installation checked and
explained.
❑
Hydraulic connection to tractor established and checked
re. correct supply.
❑
Hydraulic functions (drawbar, opening of rear gate, etc.)
demonstrated and explained.
❑
Handbrake and operating brake tested re. function.
❑
Trial run carried out and no defects found.
❑
Functions explained during trial run.
❑
Automatic on/off switch of loading mechanism checked.
❑
Pivoting in transporting and operating position
explained.
❑
Information given re. optional extras.
❑
Absolute need to read the operating manual indicated.
In order to prove that the machine and the operating manual have been properly delivered, a confirmation is necessary.
For this purpose please do the following:
-
sign the document A and send it to the company Pöttinger
(in case of Landsberg equipment: to the company Landsberg)
- document B stays with the specialist factory delivering the machine.
-
document C stays with the customer.