Copyright
Conventions
Copyright ©
2018 by PostProcess Technologies Inc. “
POSTPROCESS
”. All rights reserved. The information
disclosed herein is proprietary information owned by
POSTPROCESS
. This information shall be used solely and
exclusively by employees and customers of
POSTPROCESS
as documentation for the safe operation of
processing equipment provided by said company. The information herein shall be used by or disclosed to others
only for this purpose.
Published: February 2018
Disclaimer: The content of this guide is subject to change without prior notice. Please contact
POSTPROCESS
for the most current information. Items marked with an asterisk * have been identified as likely to be updat
-
ed. Picture on front cover is for illustrative purposes only and does not reflect actual dimensions.
WARNING
CAUTION
NOTE
Draws attention to an operating procedure, practice, or condition, etc., that may result in injury or death if not
carefully observed or followed.
Draws attention to an operating procedure, practice, or condition, etc., that may result in damage to equipment if
not carefully observed or followed.
Draws attention to an operating procedure, practice, or condition, etc., that must be emphasized or provides
information to simplify procedures tasks.
Any time a screen or button is referenced the following formatting will be used.
Screens – References to a screen on a machine should be
Bold and Italicized
.
References to gauges on a
screen will be
italicized
.
Buttons – References to a button that can be pressed or activated by an operator will be
BOLD AND
CAPITALIZED.
PostProcess Technologies, Inc. • www.postprocess.com • REV C | page 1
